Which type of water chiller does Rofin 1KW fiber laser match with?
Generally, S&A CW-6200AT dual-temperature dual-pump water chiller with 5100W cooling capacity rightly matches with 1KW fiber laser.
Recently, S&A met Simms, a new laser customer from Singapore who would like to cool Rofin 1KW fiber laser. Simms had taken a fancy to S&A CW-6500ET dual-temperature dual-pump water chiller with 7600W cooling capacity at first, but S&A recommended CW-6200AT dual-temperature dual-pump water chiller. After detailed discussion, Simms found that the laser should match with CW-6500ET dual-temperature dual-pump water chiller with a higher cooling capacity due to the requirement on flow.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-6500ET: http://Products/Dualcircuitwaterchil.html
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:
Website: http://
Iron Shielded Deep Groove Ball Bearing is one type of ball bearings. shields are non-contact metallic (carbon or stainless steel) devices which allow high-speed operation but offer limited protection against the ingress of moisture and dirt. but do not protect against liquids. They add no friction during operation and therefore do not generate heat build-up. Iron shielded deep groove ball bearings often have steel shields installed on one or both sides and are pre-lubricated with grease. While many different retainers are available, pressed steel cages are most commonly used.
Bearing dust shields have been available almost as long as Ball Bearing itself. Shields are needed to stop the grease lubrication used in these bearings from leaking out. This is particularly important in applications where grease leakage may contaminate the product. The main impetus towards shielded bearings comes from the growing use of [sealed-for-life" bearings in items such as white goods, cars and power tools. Shields are fitted in the outer ring and do not make contact with the inner ring, but form a narrow gap with it.
Depending on the bearing design, series and size, MANU supplies shields in different designs.
With one shield (-Z) on one side or two shields (-2Z/ZZ) on both sides; Due to the manufacturing processes used, open bearings can have turned recesses in the outer ring for shields.
Celarance:
Internal clearance provides the bearing room for expansion between the bearing races and will add a small amount of play between the two rings. Large clearance C3/C4 usually used in harsh environment. with good anti-seize performance used in particularly harsh environment.
Tolerances
The standard version of our single-row deep groove ball bearings has the tolerance class P0
(designs with tighter tolerances available upon request)
To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.
Iron Shielded Deep Groove Ball Bearing
Iron Seals Ball Bearing,Iron Sealed Ball Bearing,Iron Shielded Bearing,Steel Shielded Bearing
Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl
没有评论:
发表评论