Purchase of S&A CW-7900 water chiller by a New Zealand university laboratory for cooling the charge-coupled device (CCD) camera

There is a verse best working for the process of cooperation between S&A and Kim from a New Zealand university that reads: “After endless mountains and rivers that leave doubt whether there is a path out, suddenly one encounters the shade of a willow, bright flowers and a lovely village.”
Kim bought a CW-5000 chiller from S&A to cool the CCD camera, finding that S&A branded water chiller provides better cooling results. Now Kim delivers an inquiry to S&A for purchase of a set of chiller that is also for cooling CCD camera. The requirements are as follows: The cooling capacity should be 30KW at 1. the ambient temperature of 0~30℃, and 2. the water temperature of 19℃.
However, according to the performance curve of a type of S&A chiller with the maximum cooling capacity – CW-7900 chiller, it is found that the CW-7900 chiller only achieves a cooling capacity of 30KW only when the room temperature is 20℃ and the output water temperature is 30℃. S&A regretted to inform Kim that it might be impossible for S&A CW-7900 chiller to meet his cooling requirement. S&A thought that such cooperation with Kim would be impossible. However, S&A received an encouraging message from Kim.
“We still made a decision to buy this CW-7900 chiller as a testing machine. We have confidence that it will achieve cooling of CCD camera,” said Kim.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-7900:http://Products/ChillerCW790030Wrefr.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:

Website: http://

Waterjet Cutting sand, abrasive sand, Garnet Sand used for waterjet cutting of stainless steel, aluminum, carbon steel plate, copper, titanium alloy and other metal materials, tile, stone, rubber, glass, wood Wait. Special application glass cutting, mobile phone screens, semiconductors, etc.

High quality waterjet garnet sand usually has the following characteristics for your reference:

1. High quality garnet sand for waterjet cutting usually has a fast cutting speed and a more strait and smoother cutting surface;

2.The high quality garnet water cutting sand has been washed, sieved and magnetically selected several times. Ensure that the product is clean and free of dust and fine particles, as these impurities are not cut.

3. The high-quality garnet waterjet sand has no water-blocking cutter heads, which ensures the continuous and stable operation of the water jet equipment.

in water jet cutting, we always use 60 mesh sand, 80 mesh sand, 120 mesh sand and 140 mesh sand.

Abrasive Garnet Sand

Garnet Sand,Garnet Sand For Waterjet Cutting,Water Jet Garnet Sand,Abrasive Garnet Sand

HARBIN QIAN FAN XI FENG MACHINERY CO.LTD , https://www.waterjetwamit.com