Mechanical diaphragm metering pump advantages

With the development of production, mechanical diaphragm metering pump is widely used in various fields, then what are the advantages of mechanical diaphragm metering pump? See Xiao Bian following introduction. Mechanical diaphragm metering pump advantages Mechanical diaphragm metering pump advantages 1, the purchase price is relatively low. 2, and no power seal, there will be no leakage of liquid metering medium metering pump phenomenon. 3, And mechanical diaphragm metering pump can also transport a variety of high viscosity media, can transport a variety of corrosive and abrasive dangerous chemical media. 4, mechanical diaphragm metering diaphragm to withstand higher pressure, diaphragm life is not long, you need to be replaced regularly. 5, the mechanical diaphragm metering pump outlet pressure can reach 2mpa above, but the relative flow rate is relatively small, mechanical diaphragm metering pump metering accuracy of about 5%. When the pressure from the smallest to the largest process, the flow changes can reach about 10%. 6, mechanical diaphragm metering pump motor is driven by the direct drive worm gear for variable speed movement, the crank-rod mechanism under the action of the rotary motion into reciprocating linear motion. The slide bar is directly connected with the diaphragm. When the slide bar is reciprocated, it pushes the diaphragm back and forth to move back and forth. Through the opening and closing of the one-way valve on the pump head, the purpose of suction and discharge is achieved and the function of transporting liquid is achieved. 7, is a measure of liquid transport machinery, also known as quantitative pump, proportional pump. Generally described as: Mechanical diaphragm metering pump is to meet a variety of strict process needs, the flow rate can be adjusted within the range of 0-100% stepless, used to transport liquid (especially corrosive liquids) A special volume pump . (Editor: Li Juan QQ:) Recommended reading: Acting procurement

Product introduction
HHCMS-240 type Carbon Molecular Sieve
HHCMS-240 is a new kind of non-polar adsorbent. It is designed to extract nitrogen-rich gas from the air. It is suitable for separating nitrogen from the air.
The most notable features of the carbon molecular sieve are high gas-producing efficiency and low waste, especially nitrogen with a purity higher than 99.9%.

It is widely used in large air separation and sheet making equipment, and the application field covers the high-end aspects such as the storage and transportation of crude oil in yibi ships.

Project parameters

The diameter of:1.0-1.3 1.3-1.5
Packing density:≥680-700kg/m³
The intensity of particle:≥95
Compressive strength abrasion:≤1%
The moisture content:≤0.5%
Standard packing:20Kg/barrel. 40Kg/barrel. 130Kg/barrel

The adsorption time of test condition was 58s with an average pressure of 1-2s

Adsorption pressure	Nitrogen purity (%)	Yield (Nm3/ h.t.)	Nitrogen recovery rate
0.8MPa	99.99	95	24
	99.9	160	29
	99.5	240	35
	99	320	42
	98	400	43
	97	490	48
	96	560	51
	95	620	55
0.6MPa	99.99	75	27
	99.9	130	30
	99.5	190	37
	99	260	42
	98	320	44
	97	390	50
	96	445	52
	95	500	56

Pay attention to
1. The nitrogen production equipment can reduce the adsorption temperature to better show its excellent nitrogen production performance under conditions;
2. Pay attention to low temperature drying and seal preservation during storage;

Black Strip Molecular Sieve Hhcms-240

Black Strip Molecular Sieve Cms-240,Molecular Sieve Continuous Strip Desiccant,Black Strip Molecular Sieves Adsorbents,Black Strip Zeolite Molecular Sieve

Zhejiang Changxing Haihua Chemical Co.,Ltd. , https://www.zjcxhhcms.com