CHL series of horizontal multistage centrifugal pump installation considerations

Southern pump to establish a sound marketing service network, while continuing to meet the needs of the domestic market, while actively export overseas markets, products widely used booster, industrial, domestic water supply, air conditioning water cycle, heating, fire fighting systems, groundwater Extraction, sewage wastewater treatment, chemical industry and desalination and many other areas. Next Xiaobian introduce you to the South pump CHL series horizontal multistage centrifugal pump installation precautions. CHL Series Horizontal Multistage Centrifugal Pump Installation Notes CHL Series Horizontal Multistage Centrifugal Pump Installation Notes 1, the installation of pipe weight should not be subjected to the pump, otherwise easy to damage the pump; 2, the installation must be tightened anchor bolts , And at intervals of a certain period of time should check the pump to prevent it from loosening, so as to avoid violent vibration when starting the pump and affect the performance of the pump; 3, before installing the pump should be carefully checked before and after the pump flow of hard material affecting the operation of the pump Block, iron sand, etc.) so as to avoid damage to the overcurrent components during operation of the pump; 4, in order to maintain convenience and safety, install a regulating valve on the pump inlet and outlet piping and install a pressure gauge near the pump inlet and outlet, In order to prevent water hammer, a check valve should also be installed in front of the outlet gate valve to cope with the loss of power and other accidents caused by sudden power failure so as to ensure that the pump operates under the best conditions and prolong the service life of the pump. 5 The pump should be used for suction occasions, should be equipped with a foot valve, and the inlet pipe should not have too many corners, while no leakage, leakage phenomenon, so as not to affect the pump suction performance; In order not to make impurities into the pump and block the flow channel affect performance, should be installed in front of the pump inlet filter; 7, before installing the rotor pump rotor components, there should be no friction or stuck, or the pump should be opened to check the reason. (Editor: Li Juan QQ:) Recommended reading: Acting procurement multi-stage centrifugal pump structure 2016 CIFIT 98

Iron Fence

Iron Fence , Security Fence,Fence,Balcony Fence

Iron Fence,Aluminum Fence Co., Ltd. , http://www.nbaluminumfence.com