First, what is floor paint?
Floor paint is actually a kind of semi-finished products made of many kinds of substances and made through many processes. It is more wear-resistant than ordinary paint and is basically constructed on the ground. However, the outcome of the final construction is more or less affected by various factors during construction. For example: temperature, technology, construction methods, etc.
The composition of the floor paint is mainly divided into main film materials, secondary film materials, and auxiliary film-forming materials.
Main membrane material (main binder)
It is generally a polyurethane resin or an epoxy resin. The former is the base material for a variety of floor coatings, and the latter is the main binder for exterior emulsion paints.
Secondary membrane material:
Secondary membrane material is an essential part of floor paint, but it cannot be used alone as a coating. After adding it on the basis of the base material, it can make the coating performance better, and it can also get more varieties of coatings.
Auxiliary film forming materials:
Auxiliary film-forming material is not actually a substance that forms a coating film. It plays a role in the construction process and plays an auxiliary role in film formation. The amount is generally small, but it cannot be avoided. And different auxiliary materials can also have different functions for the paint.
Second, floor paint types:
Mainly classified according to the main performance of floor paint.1. Epoxy floor paint:
This type of paint has strong adhesion and can bond well with the cement floor; it can resist water, alkaline substances and corrosive substances. The main components contain epoxy resin, modified Curing Agent and so on. This type of paint contains a variety of floor paint types, used in various factories, shopping malls, warehouses, stadiums, parking lots, etc., and has a large area of cement floors.
2. Polyurethane Floor Paint:
The main components are polyether resin, acrylate resin or epoxy resin. The variety is relatively small, and it is mainly applied to places where elasticity and anti-slip functions are required.
3 anti-corrosion floor paint:
This kind of floor paint has better strength and can resist the corrosion of corrosive substances. Therefore, it is mostly used in some chemical plants, kerosene factories and so on.
4. Elastic floor paint:
This kind of floor paint has good elasticity and is mainly made of elastic polyurethane. Mostly used in stadiums and some workshops to make people walk and exercise more comfortable.
5. Anti-static floor paint:
In some factories, such as power plants, computer rooms, etc., there can be no static electricity, otherwise accidents will occur. This kind of floor paint can solve this problem well. Not only can it shield electromagnetic interference, but it can also prevent electrostatic dust collection.
6. Non-slip floor paint:
Friction is great, it can slip well and it can be used very widely.
7. Load floor paint:
This kind of floor paint has good impact resistance, bearing capacity and wear resistance. It is mostly used for paints such as factories and warehouses where heavy vehicles pass.
With the increasing demand of society, the floor paint has also continued to develop. It is more human and diversified. Not only does it play a role in anti-skid, anti-corrosion, but also more beautiful and bright, it also plays a role in the decoration of the place. All in all, it is the combination of practicality and beauty. It can also be used in home improvement.
KSNFJ is a factory ready-mix powder that has undergone strict quality control to facilitate on-site construction. It contains a selection of metallic mineral aggregate materials and specialty Portland cement, as well as special additives to promote construction performance. Specially made materials ensure gradation and free from impurities, which aggregate shows good conductivity and wear resistance.
KSNFJ for the need to improve the wear resistance, resistance of the concrete surface, in particular, sparks, antistatic areas. For example: flammable warehouse, chemical plants, petrochemical plants, dangerous products workshop, gas stations, liquefied gas stations, hangars, textiles, electronics, paper, printing and other long-term electrostatic regions.
Product Advantages:
1. To make the ground extremely hard, wear and impact resistance
2. With the concrete surface to form a monolithic bond
3. Fireworks conductive static
4. Anti-all kinds of oil, grease erosion
5. Easy to construct
Wear resistance: The KSNFJ-treated concrete floor exhibits at least three times more wear resistance than the untreated concrete floor.
Electrical properties: KSNFJ shows good electrical conductivity to dissipate static electricity. KSNFJ can be grounded in the traditional way with specific requirements. Due to the ductility of metallic materials in the ground so that the impact of metal collision with a high degree of fireworks.
Surface resistance: 1.0×105 ~1.0×108Ω
Compressive strength: Using the same amount of water as the actual construction, KSNFJ test block 28 days standard compressive strength of 90Mpa.
Storage: KSNFJ and curing agent intact packaging stored at room temperature and dry environment, the storage period of six months.
Health and Safety: The cement powder contained in KSNFJ will adversely affect the skin during normal use. When the product is mixed with dampness, the released alkali will damage the skin, irritate the eyes and respiratory system, avoid inhalation of its powder, and avoid skin and eye contact. Wear suitable gloves and eye protection. Once touched the skin, wash with water. Once you reach your eyes, immediately wash with plenty of water and seek medical treatment.
≤3.1
| Project | Performance |
|
Compressive strength (3 days) | ≥40Mpa |
| Compressive strength (28 days) | ≥90Mpa |
| Bending strength (28 days) | ≥13.5Mpa |
| Non burning, do not explode, not flammable | |
| Fire class | A1 level |
| Wear resistance(750g/500r) | ≤0.03g/㎝2 |
| Hardness (Mohs) | ≥7 |
| Surface strength (indentation diameter mm) | |
| Oil resistance oil seepage | ＜0.3mm |
| High temperature | +200℃ |
| Freezing type | -40 ℃ (Freeze-thaw 25 times after the specimen without cracks, corner off defects, the rate of strength loss |
| Bond strength(28days) | ≥2.0Mpa |
| Skid resistance (wet and dry friction coefficient) | ≥0.5 |
| Air cleanliness | N7 ~ N9 level |
Green No harmful radioactive, no harmful volatiles, no pollution
Non-Flammable Ground Hardener,Non-Flammable Carborundum Floor,Anti-Static Carborundum Floor
Jiangmen Kasole Building Materials Co., LTD. , https://www.kasole-paint.com
没有评论:
发表评论