Stacking Principle Requirements of SSAW Steel Pipe

1, the principle of SSAW steel pipe(Spirally Submerged Arc Welded Steel Pipe) stacking requirements in the palletizing stability, to ensure the safety of the premise, so that by varieties, specifications palletizing, different varieties of materials to be palletizing, to prevent muddy and mutual erosion;

2, prohibited in the spiral steel pipe around the storage area of steel erosion of the items;

3, spiral steel pipe bottom should be high, strong, smooth, to prevent the material damp or deformation;

4, the same kind of material according to the storage have been stacked;

5, open-air stacked spiral steel pipe, the following must have wooden mat or stone, stacking a slight tilt to facilitate drainage, and pay attention to the material placed flat to prevent bending deformation;

6, SSAW steel pipe stacking height, artificial homework of not more than 1.2m, mechanical homework of not more than 1.5m, stacking width of not more than 2.5m;

7, between the stack and the stack should leave a certain channel, check the road is generally 0.5m, access channel depending on the material size and transport machinery may be, generally 1.5 ~ 2.0m;

8, open piling steel and channel should be placed, that is, mouth down, I-beam should be put, the steel I channel surface can not be up, so as not to water rust;

9, stack the bottom of the high, if the warehouse for the sun to the cement floor, pad can be 0.1m; if the mud, to be pad 0.2 ~ 0.5m. If the open field, cement floor pad height 0.3 ~ 0.5m, sand surface pad height 0.5 ~ 0.7m.

Other Reflective Material

Non-Woven Bag，Safety Traffic Cone，Shopping Bag

Safety Vest,Reflective Material Co., Ltd. , http://www.chsafetyvest.com