1. Guider
Embroidered embroidery is the most widely used in embroidery, as long as the material can embroider embroidered embroidery can do.
2. Three-dimensional embroidery
Dimensional embroidery (3D) is the use of the three-dimensional embroidery pattern EVA plastic bag inside the formation, on ordinary flat embroidery can be produced. (EVA plastic of different thicknesses, hardness and color).
3. appliqué
Appliqué is to use the patch instead of stitches and saving embroidery patterns to make more vivid, Common Flat Embroidery Machine can produce.
4. The thick line embroidery
Thick line embroidery is done with a larger (eg 603) as a sewing thread embroidery threads, with large holes or large needle pin, 3mm thick line and the hook to complete the embroidery needle plate, ordinary flat Embroidery Machine can produce.
5. carving holes embroidery
Boring can be embroidered on a normal flat embroidery machine production, but need to install carving holes embroidery device (currently only attached to the first
1 needle bar). Using cloth carving knife carving holes through, and then use the embroidery thread edging the middle hole shape is formed.
Bianjin production line can be used on normal flat embroidery machine, since the line is flat Bianjin Spiraea So while the need to install Bianjin line device (can be installed in any one of the needle bar).
7. sequin embroidery
Sequin embroidery devices are currently only installed in TFKN, TFGN TMLH machines and machine flat embroidery machine head embroidery beads specifications 2 ~ 9mm.
8. flocking embroidery
Flocking can be embroidered on ordinary flat embroidery machine production, but need to install flocking needle, embroidery needle flocking principle is to use the hook on the upper flannel fleece evoke planted on another cloth.
9. Toothbrush embroidery
Toothbrush embroidery embroidery, also known as vertical lines, can be produced on ordinary flat embroidery machine, embroidery method with the same three-dimensional embroidery,
But after embroidery need to cut off a part of the film after the film is all removed, Spiraea naturally erected.
10. wrinkle embroidery
Wrinkle can be embroidered on a normal flat embroidery machine production, but must comply with the contraction of the backsheet and an aqueous bottom line, embroidery backing shrink after using the case and make the heat-shrinkable fabric wrinkled, when the bottom line by the water-soluble backing can be dissolved with blisters cloth separation, but note that you want to use chemical fiber fabric thin material effect was obvious.
11. The finished cap embroidery
Finished Cap Embroidery Machine with the required on a cylindrical cap frame to produce, it is to make the finished cap and then get on a machine embroidery embroidery.
12. Garment Embroidery
Embroidered garments need to fit on a cylindrical machine frame to produce garments, it is to make the finished clothes and then get on a machine embroidery embroidery.
13. socks embroidered
Socks embroidered in ordinary flat embroidery machine production but with only socks embroidery frame.
Single Head Embroidery Machine is a multi function machine, it can embroidery on ready made cap, ready made t-shirt and the fabric.
Single Head Embroidery machine , one step tracing makes embroidery easy Description: 12 needles, one head, suitable for flat bed embroidery, cap/hat embroidery, finished garments embroidery and more.
*Related Products:embroidery machine for small letter.
Single Head Embroidery Machine
Single Head Embroidery Machine,One Head Embroidery Machine,Single Head Computerized Embroidery Machine,Single Head Cap Embroidery Machine
HEFENG COMPUTERIZED EMBROIDERY MACHINES LIMITED , http://www.hfembroiderymachine.com
没有评论:
发表评论