Roll Forming Machine Safety Operation

1. Before starting the machine, you must carefully check the device status flag is qualified, qualified and prepares for the next step operation. Check before starting the linkage device is solid, according to the lubrication instructions lubricate the friction surface, the processing of checking the power supply is stable.
2. The workpiece mounting and dismantling, should be gently and lubricated with oil surface, the adjusting screw can not force it running. When shaking hands round each axis to prevent excessive force, too fast and avoid overrun.
We must clean up the oil on the machine and other debris before 3. Processing. Must not place items near the machine. Machining, to ensure timely filling material in order to achieve the required material molding machine full extent.
4. For your own safety, process, non-contact touch processing, when the machine work machine load should not exceed a predetermined, non-super-standard, overload devices.
5. The filler disk should be cleaned daily wipe motors, the electrical box outside dust protection manual control box and keyboard clean. Periodic inspection and lubrication rail, and scroll bars.
Must check the stability of the supply voltage 6. operation. Machine twice turned interval of not less than 30 seconds.
Prohibit the use at the time of equipment failure, downtime immediately found the problem, the process before use.
7. When the machine is working, it is prohibited hands away from the machine and workpiece. When adjusting maintenance equipment, prior to shut down, turn off the power.
8. prohibit non-operators to enter the work area should be kept more than 2 meters away from the device.
9. Do not adjust or repair equipment at work, be sure to shut off the power, and hang warning signs before the operation.

10. When people with the operation, before performing any operation must notify other staff, understand the intention behind the executable confirm.

This Double Layer Roll Forming Machine is the special equipment for continuous rolling and cold-forming on steel sheet. Double layer Roll Forming Machine adopts coiling steel sheet as the raw material, decoiling, continuous rolling and cold-forming, cut to the size out put the finished panal to the staker. The Double layer roll forming machine adopts PLC control, AC frequency and speed adjusting technology, and it realizes the continuous production automatically, therefore, Double layer roll forming machine is really a new type of energy-saving and high-effective producing equipment for steel structure.

Double Layer Roll Forming Machine

Double Layer Roll Forming Machine,Double Layer Forming Machine,Double Roll Forming Machine,Double Level Roll Forming

HangZhou Roll Forming Machinery Co.,Ltd , http://www.m-rollformingmachine.com