2.Apply a weather-protective stain or a water-repellent preservative by using a paintbrush to the plywood prior to its installation into the home or building project. It is also recommended to apply a coat of mold killing or mold protection in order to prevent mold growth as the plywood is exposed to heating and cooling as well as humidity and water vapor. Applying water repellents is also important during the construction process when heavy rains can fall multiple times a week during the summer season. Flat subfloors should be treated during construction in order to help prevent swelling and delamination.
3.Apply an outdoor, latex-based paint to plywood in order to provide more protection that will have a more aesthetic appearance than traditional stains. If the plywood is going to be subject to constant abrasion, such plywood sheets used for skateboard ramps, stain, however, will provide a more resistant and durable protective coating than paint. Be sure to coat all sides of the plywood.
4.Install tar paper underneath the plywood in order to protect the edges and underside from water that may seep through cracks on skateboard ramps. Other options for skateboard ramps, recommended by XtremeSkater, is to use spare urethane or polyurethane to provide a protective finish. The spare urethane is the "most heavy duty" paint available and will cover about 500 square feet per gallon. If you are using multiple layers of plywood to build a skate ramp, then it is also advisable to coat the underside of each layer as well as the top and sides.
Agrochemical Pesticide,Fenvalerate Insecticide,Strong Pesticide
Shandong Qiaochang Chemical Co., Ltd. , http://www.hzchemicals.com
没有评论:
发表评论