S&A air-cooled chiller for cooling pyrometer

A customer from USA is interested in S&A air-cooled chiller CW-5300 with compressor refrigeration function to cool Pyrometer.

The technical requirements as belows:

1. Required cooling capacity in 1.5KW at 10C target water temperature and 20C ambient temperature;

2. Operating voltage is 110V and PH 60Hz

3. Require 2L/min flow rate @ 1 bar operating pressure

4. 1100W heat load to be dissipated

5. Needs to run 20 hours a day for as long as possible

According to above parameter, CW-5300 is not satisfied with Pyrometer`s cooling demand, as a result, we recommend chiller CW-6000 with larger cooling capacity:

CW-6000 technical parameter: http://Products/ChillerCW60003000Wco.html

CONTACT S&A

TEL:+86-20-89301885,

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:

Website: http://

Thrust Ball Bearings are manufactured as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.
Bearing features
Separable and interchangeable
The separable components of thrust ball bearings are interchangeable . This facilitates mounting and dismounting, as well as maintenance inspections.
Initial misalignment
Bearings with sphered housing washer(s) can accommodate initial misalignment.
Interference fit
Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.

Trust Ball Bearings

Trust Ball Bearings,Special Thrust Ball Bearing,Precision Thrust Ball Bearing,Thrust Bearing

Ningbo Ritbearing Imp & Exp Co.,Ltd. , http://www.ritbearingchina.com